Hello.
I'm working on a solution for four different virtual hosts. Behind every virtual host is a bot as moderator which each has his own shared roster group - (i.e.:Moderator_some.example1.de, Moderator_some.example2.de,...). On the other side there are Visitor Groups for each virtual host - (i.e.: Visitors_some.example1.de, Visitors_some.example2.de,...).
Hi,
I have installed ejabberd-17.08.23 by compiling sourcecode. Yesterday I was able to launch successfully after installation(config is not changed so its pointing to localhost and I have tested this using profanity) but today when I try to launch same, ejabberd is not coming up and crash report was showing as below.
Can anyone give pointers how to resolve this? Thanks a lot for your help.
2017-08-26 15:59:14.399 [error] <0.231.0>@ejabberd_listener:accept:311 (#Port<0.14687>) Failed TCP accept: invalid argument
I'm running ejabberd 17.07 on Debian 9. I am using PostgresSQL as the DBMS. In order to initialize the database, I used /usr/lib/x86_64-linux-gnu/ejabberd-17.07/priv/sql/lite.sql as a baseline. I made a copy called "plite.sql" and edited the MySQL syntax so that it fit with PostgresSQL syntax. I removed "INTEGER PRIMARY KEY AUTOINCREMENT" (which is not supported by psql) and exchanged it for "SERIAL PRIMARY KEY" as well as removed the "UNSIGNED" qualifier from the timestamp columns. Once I did this, I was able to initialize the database.
I was login as user "imo2o_73693@jianyezuqiu.cn/Smack", send a message to user "imo2o_22673@jianyezuqiu.cn",
the user of imo2o_22637 offline, so the message store as offline message.
but after one day later, I received a offline delay error message sended from ejabberd server, how can I disabled this message,thanks! The received message as follows:
I use ejabberd 17.01 and 7 nodes are cluster, one of nodes is stoped and returns this error:
tail -f /var/log/messages
kernel: [1284821.040533] 1_scheduler[48247]: segfault at 7f456a5ecaa8 ip 0000000000552ecc sp 00007f45af57e920 error 4 in beam.smp[400000+279000]there are no errors log in ejabberd logs(error.log, crash log).
ejabberd cluster have s2s connection.
what 's problem?
thanks in advance.
Would i kindly ask someone point me in the right direction to ensure my server is configure for file transfers. Right now it is painfully slow using the conversation clients
Thanks in advance.
David
Hello,
I am using ejabberd 16.04 in Linux, I have different requierement for my app in which I want that when two users are available for chat when one user sent message to another user at that time I want that specific event should be trigger so based on that I can store details in my database.
I'm having a problem with a new ejabber installation.
Within our local subnets (192.168.x.x) I am able to connect to the ejabber host with both Pidgin on my Linux desktop and using AstraChat on my cell phone on our companies internal wireless network.
When I switch the phone's wireless off and use the carrier's connection, I can't get a response from the host.
I've done port forwarding on the firewall and have run tcpdump on the server. I can see the packets from the outside reach the server but the server never replies.
i am using ejabberd 17.07 version ,auth_method: ldap and using mod_vcard. There is no problem.I can reach rosters vcards anyway when one roster changed his info from ldap for example mobile number or title we can see new info after 1,5 or 2 hours later. Is there any way to see new info immediately.
thanks
Good day,
I configured my new ejabberd server, but when I start him the follow message appears in the log:
01:49:57.553 [warning] CA directory /etc/ssl/certs doesn't contain hashed certificate files; configuring 'ca_path' option might help
01:49:57.604 [warning] certificate from /etc/ejabberd/ejabberd.pem is invalid: certificate is signed by unknown CAThe second problem is, that I cant open a s2s connection, when the server try to connect to other servers, the following error appears:
Hello,
My server uses anonymous authentication, and anyone is allowed to create a (non-persistent) room. I would like to disable moderator permissions for MUC room creators, so they can't kick/ban others. Essentially, everyone in the room should have the same limited permissions, no matter who created it.
How can I configure ejabberd to do this?
Hello, I have problem with file transfer. I`m using ejabberd as a server and Spark as client. File transfer from me to another user is extremeley slow (IBB mode?), but when user ports file to me - it is very fast (DC mode?). I can`t define where the problem is. Can you give some advice about it?
Hi,
I installed ejabberd on our company (Debian Server). I use web app to administration but have problem with rooms.
I created rooms using the ejabberdctl (muc module), I can assign affiliations to users etc.
But when i want to create room for each our section in company i need do it by PSI XMPP client.
From command line i dont know how to set room options like (only members, password protected etc.)
When i run
ejabberdctl get_room_options room_name muc_service
it returns "not known" ...
Hi,
In XEP-0060 this is metioned:
A service MUST allow owners and publishers to subscribe to a node, and to retrieve items from a node even if they are not subscribed. A service MAY auto-subscribe owners and publishers if they are not already subscribed,
How do I enable this auto subscribe to publishers in ejabberd? I want to keep the subscription access as authorize but owners and publishers are automatically subscribed. Others need to be authorized.
Is this implemented in ejabberd?
Hey there all,
Here at $dayjob we'd like to make it so that your jabber password is one fewer to remember, and instead use your Kerberos password.
However, we still want to have control of the user list be via the ejabberd web UI (as we may have users such as consultants who have a valid pam login, but not want them to use jabber).
We don't do LDAP of any sort -- most of our management is static, but only our ops group have accounts on our jabber machine.
I just installed ejabberd (community server 17.09) to a windows machine (win 7) and cant seem to get it to work.
I look at my services and I see it running (ejabberd01... ), which started automatically, but I don't see "epmd" or "beam" in the processes.
When I run "bin\ejabberdctl status" I get
"Failed RPC connection to the node ejbberd@localhost: nodedown"
When I run "bin\ejabberdctl start" I get
"Error: the ejabberd node ejabberd@localhost is registered and should be running."
Hello, I have 100.000 groups in ejabberd cluster can I balance groups on ejabberd nodes?
or uses dedicated ejabberd servers for groups in cluster?
how can I see number of groups on each nodes?
thanks in advance
Hello!
Is it possible to use personal certificate for every client?
I have been using a setup where multiple virtual hosts use the same pubsub module:
host_config:
"a.example.com":
modules:
mod_pubsub:
host: pubsub.a.example.com
...
"b.example.com":
modules:
mod_disco:
extra_domains:
- "pubsub.b.example.com"
...Then, users from both virtual hosts see the the same pubsub service. So far, so good.
However, users on host b.example.com will not have PEP activated, so there is no OMEMO (and much more) for them.
I have installed ejabberd 17.06 over Red Hat Enterprise Linux Server release 7.3 (Maipo) with 20GB of HDD and 4GB of RAM
This ejabberd is only used for around 20 users now.
I have a problem. The process "/opt/ejabberd-17.06/bin/beam.smp -K true -P 250000........" has around 80 open files when it starts. If one user log in Jabber, open files increased at 1, and if one user log out, open files decreased at 1. This is normal.
The problem is that anything at server is increasing the open files for the beam.smp process, apart of the login/logout from users.